Kit Contents

Your Beginner Pedal Kit comes with a soldering practice kit, a pre-drilled aluminum enclosure (optionally decorated with powder coating and UV printing, or a face plate), and the following parts:

Wrench

The kit includes a unique 3-in-1 wrench tool so you can tighten the nuts on the potentiometers, foot switch, and phone jacks.

Presorted Components

The components that might otherwise be difficult to identify are presorted in a labeled, cardboard tray.

Most kits throw all the parts in the bag, requiring you to read the codes or colored stripes printed on them. This can be a source of frustration and mistakes, so let's avoid that! If you get any mixed up, though, you can use this table to help identify them if needed.

(some images below show the parts from multiple angles to help identify them; it's NOT an indication of quantity)

	designator	value / type	markings
	R1	510 kΩ	green, brown, black, orange, brown
	R2	1 MΩ	brown, black, black, yellow, brown
	R3	4.7 kΩ	yellow, violet, black, brown, brown
	D1	1N4148
	D2	1N5817
	C1	220 nF	224J100 (but may vary)
	C2	100 nF	104J100 (but may vary)
	Q1	2N3904

Potentiometers

potentiometer, 100kΩ (volume) nut washer	potentiometer, 100kΩ (volume)
potentiometer, 10kΩ (gain) nut washer	potentiometer, 10kΩ (gain)
(2) potentiometer dust covers (may be pre-installed)	(2) potentiometer dust covers (may be pre-installed)

Color Coordinated Parts

These will vary depending which enclosure you chose for your pedal.

Enclosure (You choose. Designs vary.)	Enclosure (You choose. Designs vary.)
Face plate if you chose plain aluminum	Face plate if you chose plain aluminum
LED (Color depends on enclosure design)	LED (Color depends on enclosure design)
(2) knobs, T18 push on, 6mm shaft (Color depends on enclosure design)	(2) knobs, T18 push on, 6mm shaft (Color depends on enclosure design)

Common Parts

These are the parts you'll get with any of our full pedal kits, regardless of which circuit or enclosure you choose.

LED spacer	LED spacer
2.1mm DC power jack	2.1mm DC power jack
3PDT latching foot switch (color varies) (2) nuts washer lock washer	3PDT latching foot switch (color varies)
ribbon cable, 2 inches, 6 conductors	ribbon cable, 2 inches, 6 conductors
ribbon cable, 1 inch, 4 conductors	ribbon cable, 1 inch, 4 conductors
(2) phone jacks, 1/4" nut washer	(2) phone jacks, 1/4"

PCB (Printed Circuit Board)